Easyinsmile Silicone Impression Material Light Body Dental Material 2*50ml
$22.00
Product features:
1.Brand:Easyinsmile
2.Excellent precision.
3.High dimensional stability.
4.High tear strength and tensile strength.
5.Easy mixing.
6.Packaging: 2*50ml
7.Types:Light body
Real time:
5
Visitor right now
Product features:
1.Brand:Easyinsmile
2.Excellent precision.
3.High dimensional stability.
4.High tear strength and tensile strength.
5.Easy mixing.
6.Packaging: 2*50ml
7.Types:Light body
1.Brand:Easyinsmile
2.Excellent precision.
3.High dimensional stability.
4.High tear strength and tensile strength.
5.Easy mixing.
6.Packaging: 2*50ml
7.Types:Light body
Product introduce:
1.Definition
A-silicone Impression Material is silicone-based impression materials for using in dentistry.
A-silicone Impression Material is silicone-based impression materials for using in dentistry.
2.Indication
Crown and bridge impressions,inlay and onlay impressions.
3.Composition
Polyvinyl siloxane,hydrogen polysiloxanes,silica,platinum catalyst,pigments,menthe flavor,filler.
4.Impression tray
Choose the rigid stock or individual tray for your patient.To get better adhesion to metal or plastic trays,a tray adhesive is allowed.
5.Technical Date
Times refer to normal room temperature(72℉/23℃ and a normal relative humidity of air(50%).
6.Mixing of the materials
Mix equal parts in volume of base paste and catalyst paste at room temperature.Take the base paste with the blue spoon and the catalyst paste with the white spoon.Knead the components quickly with the fingertips for at least 30 seconds until the colour is homogeneous. Close jars immediately after use.
Don't interchange caps of jars.
7.Light Body Handling
Automix:Light Body is automatically dispensed and mixed when extruding the two components out of the mixing tip.When using a new cartridge,remove and discard the cap.Attach the mixing tip and,if need be,an Intraoral-Tip to the cartridge. Leave the used mixing tip on the cartridge after use.It serves as a cap until next use.
Automix:Light Body is automatically dispensed and mixed when extruding the two components out of the mixing tip.When using a new cartridge,remove and discard the cap.Attach the mixing tip and,if need be,an Intraoral-Tip to the cartridge. Leave the used mixing tip on the cartridge after use.It serves as a cap until next use.
8.Disinfection
The impression material must be disinfected immediately after take from the mouth.Recommend is theuse of a 2%glutaraldehyde solution.Please ensure that the used disinfectant is indicated for the use with addition curing silicone impression material.After removal from the mouth,clean impression under the running water.Leave the impression in the disinfecting solution for about 10 to 15 minutes.Finally rinse off the disinfection solution under the running water again.
After 30 minutes,die stone models may be poured at the earliest.We recommend using special die stone models(ISO 6873,Type 3 or Type 4).
After 30 minutes,die stone models may be poured at the earliest.We recommend using special die stone models(ISO 6873,Type 3 or Type 4).
9.Storage
Store and use in dry location at room temperature not exceeding 78F/25C.The impression is stable and can be poured.even after months without loss of accuracy.We recommend not storing material in the frigerator or in the freezer.
Package:2 tubes 50ml paste
Package:2 tubes 50ml paste
Please Note
•Close jars immediately after use paste.Don't interchange caps of jars.
•Don't wear.iatex gloves when mixing and kneading the material.If you had contact with latex gloves before mixing,wash your hands thoroughly.The use of PVC or.PE gloves is recommended.
•Before the first time.use of light body.,need to make the material extrusion amount,until the
two-component mixing head at the same time by extrusion.
•Allergic caution in,the use of A silicon impression material
•Keep out of the .children.For dental use.only.
•Higher temperatures shorten,lower temperatures increase working time.
•Never allow the impression to come into contact with organic solutions or liquids containing same as thismay result in swelling of the material and therefore may lead to inaccuracies.
•Ordinarily Technique and One step Technique is either-or method.
•Don't use together with condensation curing or polyether type impression materials.
•Don't use after expiration date.
•Before the first time.use of light body.,need to make the material extrusion amount,until the
two-component mixing head at the same time by extrusion.
•Allergic caution in,the use of A silicon impression material
•Keep out of the .children.For dental use.only.
•Higher temperatures shorten,lower temperatures increase working time.
•Never allow the impression to come into contact with organic solutions or liquids containing same as thismay result in swelling of the material and therefore may lead to inaccuracies.
•Ordinarily Technique and One step Technique is either-or method.
•Don't use together with condensation curing or polyether type impression materials.
•Don't use after expiration date.
95015
10000 Items
Specific References
Product features:
1.Brand:Easyinsmile
2.Excellent precision.
3.High dimensional stability.
4.High tear strength and tensile strength.
5.Easy mixing.
6.Packaging: 2*50ml
7.Types:Light body